Products / Grinding and Slicing / Water / Challenge 300CR
Synthetic Coolant for Plastic and Glass Lenses
Challenge 300CR Details
Product is available in 5-gallon pails and 55-gallon drums.
Ceramic, Fused Silica, Glass, Poly Carbonate lens
|Challenge 310-HT||Challenge 300CR||Challenge 300-HT||Challenge 400HT|
CHALLENGE 300-CR is designed for use at economical dilution ratios and is equally effective in hard and soft water. Maintaining dilution ratios with a hand-held refractometer is recommended. A pH meter is also useful. Develop production-specific scales by obtaining accurately measured samples of a properly diluted mixture that corresponds to use. Maintain a higher concentration for recirculating, filtered coolant systems.
Product should be stored in a temperature controlled environment. Prolonged exposure to temperatures at or below 32° Fahrenheit (0°C) is discouraged. Prolonged exposure to temperatures at or above 100° Fahrenheit (38°C) is also discouraged. In addition, material should always be sealed when not in use to prevent evaporation.
Dispose of in accordance with all applicable local regulations.