Products / Grinding and Slicing / Water / Vector HTA-D2
Synthetic Coolant/Lubricant for Diamond Wire Cropping and Squaring
Vector HTA-D2 Details
Product is available in 5-gallon pails and 55-gallon drums.
Gallium Arsenide, Germanium, Sapphire, Silicon, Silicon Carbide
|Vector HTA||Vector HTG||Vector HTA-D2||Vector HTI-1.1||Vector HTI|
VECTOR HTA-D-2 is designed for use at economical dilution ratios and is equally effective in hard and soft water (though DI or softened water is best). For optimum results dilute the product with water at between 25:1 and 50:1 depending on the sawing application.
Maintaining dilution ratios with a hand-held industrial fluid tester (refractometer) is recommended. Develop production-specific scales by obtaining accurately measured samples of a properly diluted mixture that corresponds to use.
Product should be stored in a temperature controlled environment. Prolonged exposure to temperatures at or below 32° Fahrenheit (0°C) is discouraged. Prolonged exposure to temperatures at or above 100° Fahrenheit (38°C) is also discouraged. In addition, material should always be sealed when not in use to prevent evaporation.
Dispose of in accordance with all applicable local regulations.