Products / Grinding and Slicing / Water / Vector HTI-1.1
Synthetic Coolant/Lubricant for Silicon Cropping, Sawing, & Edge Grinding
Vector HTI-1.1 Details
Product is available in 5-gallon pails and 55-gallon drums.
Gallium Arsenide, Germanium, Sapphire, Silicon, Silicon Carbide
|Vector HTA||Vector HTG||Vector HTA-D2||Vector HTI-1.1||Vector HTI|
VECTOR HTI-1.1 is designed for use at very high dilution ratios. It is typically evaluated at a ratio of 400 parts water to 1 part product (.25%). Since the dilution ratio is so high, water quality plays an important role in the performance of the fluid make-up. Deionized (DI) water works best because of the elimination of ion interference with the surfactant base. Softened or fairly normal tap water will also perform adequately if the quality does not fluctuate.
We recommend that dilution ratios be maintained with a conductivity meter and a pH meter. For consistent results, develop production-specific scales by obtaining accurately measured samples of a properly diluted mixture that corresponds to use. Use this product in “once-through” systems only.
Product should be stored in a temperature controlled environment. Prolonged exposure to temperatures at or below 32° Fahrenheit (0°C) is discouraged. Prolonged exposure to temperatures at or above 100° Fahrenheit (38°C) is also discouraged. In addition, material should always be sealed when not in use to prevent evaporation.
Dispose of in accordance with all applicable local regulations.