Products / Lapping Additives / Water / Challenge 550-HT
Slurry Additive for Suspending Non-Treated Abrasives (Recirculating)
Challenge 550-HT Details
Product is available in 5-gallon pails and 55-gallon drums.
Ceramic, Fused Silica, Glass, Poly Carbonate lens
|Challenge 543-HT||Challenge 540HT||Challenge 550-HT||Challenge 555-HT|
CHALLENGE 550-HT is used at approximately 5% (by volume) with deionized (DI) water or tap water. After CHALLENGE 550-HT is mixed with the water in the slurry tank, add the abrasive. The slurry will be ready for use almost immediately. Start grain loading 400 g/liter for a one-meter machine. Flow rate for the slurry should be approximately 300ml/minute for a one-meter machine.
Product should be stored in a temperature controlled environment. Prolonged exposure to temperatures at or below 32° Fahrenheit (0°C) is discouraged. Prolonged exposure to temperatures at or above 100° Fahrenheit (38°C) is also discouraged. In addition, material should always be sealed when not in use to prevent evaporation.
Dispose of in accordance with all applicable local regulations.