Products / Lapping Additives / Water / Vector HTN
Lapping/Polishing Additive (Recirculating)
Vector HTN Details
Product is available in 5-gallon pails and 55-gallon drums.
Gallium Arsenide, Germanium, Sapphire, Silicon, Silicon Carbide
|Vector HTS-1.4EU||Vector HTS-3||Vector HTN|
|Color||Translucent White||Translucent White||Blue|
VECTOR HTN is used at approximately 5% (by volume) with deionized (DI) water or tap water. After HTN is proportionately mixed with the water in the slurry tank, add the abrasive. The slurry will be ready for use almost immediately.
Start grain loading 400 g/liter of water for a one-meter machine.. Flow rate for the slurry should be approximately 300ml/minute for a one-meter machine.
Product should be stored in a temperature controlled environment. Prolonged exposure to temperatures at or below 32° Fahrenheit (0°C) is discouraged. Prolonged exposure to temperatures at or above 100° Fahrenheit (38°C) is also discouraged. In addition, material should always be sealed when not in use to prevent evaporation.
Dispose of in accordance with all applicable local regulations.