Products / Sonic Cleaning / Water / Challenge 910-FPD
Low Foam Detergent for Cleaning FPD Glass, Solar Wafers, and Wire Saws
Challenge 910-FPD Details
Product is available in 5-gallon pails and 55-gallon drums.
|ClearVu 7||Challenge 907-FPD||Challenge 810-S||Challenge 910-FPD||Challenge 912-FPD|
|Color||Clear||Clear/Cloudy Liquid||Clear Liquid||Clear/Cloudy Liquid||Clear/Cloudy Liquid|
CHALLENGE 907-FPD is a neutral pH, low foaming detergent, 910-FPD and 912-FPD are both alkaline low foaming detergent. The pH of the concentrate of CHALLENGE 912-FPD is ~13.5 and the pH of a 4% solution is ~12.5. At this pH the product is extremely effective at removing all typical contaminants found on glass substrate. Since higher pH levels are not always necessary to precisely clean different substrates in certain processes, CHALLENGE 907-FPD and 910-FPD are available. These products are essentially the same as CHALLENGE 912-FPD only manufactured with different inorganic components. IDI can instruct the customer on how to add caustic tank-side to reach the precise pH regime needed for effective “application specific cleaning”. If different pH regimes are needed for different processes, CHALLENGE 907-FPD will allow for customer controlled pH adjustments from 7 to 13. This also alleviates handling and transportation issues related to the caustic nature of CHALLENGE 912-FPD.
It is recommended that evaluation of 900-FPD Series products begin at a 5% concentration mixed with 45° C de-ionized (DI) water, although tap water that does not contain hard water ions is also acceptable. Since the type and degree of residue to be removed varies, these factors will ultimately determine specific “in-house” dilutions. Other factors to consider include temperature, exposure time and functioning of the spray wash/brush-clean or other mechanical cleaning system. For cleaning wire saws, fill the slurry/coolant tank with a 4-5% solution of water and 910-FPD. Circulate throughout the machine until clean. Rinse system with water and recharge with slurry or coolant.
Product should be stored in a temperature controlled environment. Prolonged exposure to temperatures at or below 32° Fahrenheit (0°C) is discouraged. Prolonged exposure to temperatures at or above 100° Fahrenheit (38°C) is also discouraged. In addition, material should always be sealed when not in use to prevent evaporation.
Dispose of in accordance with all applicable local regulations.